3214J 0.25W 10k Ohm 5 Turn Multiturn Precision Trimmer Potentiometer
Likaroloana
• Sebaka se ka Hodimo sa 4 mm Sekwere / Sephetho se sengata / Sekerete / Diindasteri / Se kwahetsweng.
• Ho sebelisa thepa e rekiloeng Netherlands.
• E koetsoe ho mamella ts'ebetso ea ho hlatsoa boto.
• Finyella litlhoko tsa ts'ebetso ea ho kopanya hape.
• Ho amohela liphutheloana tsa lireile ho fihlela lits'ebetso tsa ho kenya tse iketsang.
Tlhaloso
- Potentiometer ea 3214J SMD Trimmer ke tharollo e nyane, e nepahetseng haholo e etselitsoeng lits'ebetso tsa sejoale-joale tsa elektroniki. E na le moralo oa cermet oa lisekoere tse 4 mm, o nang le li-turn tse ngata, karolo ena ea maemo a indasteri e netefatsa botsitso le ho tšoarella ho hoholo.Ntlo ea eona e entsoe ka thepa e tsoang linaheng tse ling e sa keneleng mocheso o phahameng e tsoang Madache, e leng se etsang hore e lokele lits'ebetso tsa ho kopanya hape le ho eketsa ts'epo tlas'a maemo a thata. Ka kaho e koetsoeng, 3214J e mamella ho hlatsuoa ha boto le ho pepesehela tikoloho, e netefatsang bophelo bo bolelele ba ts'ebeletso.E tlisoa ka har'a sephutheloana sa lireile bakeng sa ho kenngoa ka boiketsetso, mohlala ona o boetse o fana ka tokiso ea lehlakore, o fana ka phihlello e bonolo ea ho lekanya nakong ea ho lokisa potoloho. 3214J, e sebelisoang hangata likhokahanong tsa mehala, lisebelisoa, taolo ea indasteri le lisebelisoa tsa elektroniki tsa bareki, e kopanya ts'ebetso le ho kopanngoa habonolo.
Litlhaloso
| Litšobotsi tsa Motlakase | Mefuta e sa Resistance Range | 50Ω~2MΩ |
| Mamello ea Khanyetso | ± 10% | |
| Khanyetso ea Terminal | ≤±1% R kapa 3Ω | |
| Phapang ea Khanyetso ea ho Kopana (CRV) | ≤3%R kapa 3Ω | |
| Khanyetso ea ho kenya mocheso | 500 Vdc. R1≥1GΩ | |
| Mamella Motlakase | 101.3KPa, 500 Vac； 8.5KPa, 250 Vac | |
| Matla a Dielectric Boemo ba Leoatle | 500 Vac (1 Min.) | |
| Maeto a Atlehang | Liphetoho tse 4±2 | |
| Litšobotsi tsa Tikoloho | Khanyetso ea Mocheso oa ho Weld | 250℃, metsotsoana e 10. |
| Matla a Lekantsoeng | 70℃, 0.25W ； 125℃, 0W | |
| Boemo ba Thempereichara | -55°C ~ + 125°C | |
| Motsoako oa mocheso | ±250, ±100 ppm /°C | |
| Phetoho ea mocheso | ΔR≤±2%R, Δ(Uab/Uac)≤±1% | |
| Ho thulana | 10-500Hz, 0.75mm, 6h ΔR≤±1%R, Δ(Uab/Uac)≤±2% | |
| Ho thothomela | 100G, ΔR≤±1%R, Δ(Uab/Uac)≤±2% | |
| Mamello ea Motlakase ho 70°C | Lihora tse 1000 @ 70℃ Matla a Lekantsoeng; ΔR≤±3%R | |
| Mamello ea Mechini | Lipotoloho tse 200, ΔR≤±3%R | |
| Litšobotsi tsa 'Mele | Maeto a Mekaniki ka Kakaretso | Liphetoho tse 5±2 |
| Torque ea ho Qala | ≤25 mN.m | |
| Torque ea Clutch | ≤35 mN.m |
Tekanyo
Sephutheloana
Tlhaloso ea sephutheloana: Likarolo tse 500/Terei (7'), Likarolo tse 1500/Terei (13').
Likopo
• Mehala ea puisano – Bakeng sa tokiso ea lets'oao le taolo e nepahetseng ea potoloho.
• Lisebelisoa tsa Elektroniki tsa Indasteri – Li sebelisoa lisebelisoa tsa othomathiki le libotong tsa taolo.
• Lisebelisoa le Tekanyo – Ho lokisa potoloho hantle disebedisweng tse nepahetseng.
• Lisebelisoa tsa Bongaka – E netefatsa ts'epo e phahameng le ts'ebetso e tsitsitseng.
• Lisebelisoa tsa Elektroniki tsa Bareki – E loketse lipotoloho tse nyane le tse nepahetseng haholo tsa tokiso.
• Di-elektronike tsa Dikoloi – Di sebediswa di-sensor le di-module tsa taolo bakeng sa ho lekanya ka nepo.
Melemo
• Phepelo e tobileng fekthering, ha ho na bathusi ba mahareng.
• Lisetifikeiti tse tlatsitsoeng tse kang RoHS, Reach, jj le netefatso ea boleng bo holimo.
• Bokgoni bo lekaneng ba tlhahiso, nako e kgutshwane ya ho tlisa thepa.
• Sehlopha sa litsebi sa tšebeletso ea kamora thekiso.
• OEM le ODM lia fumaneha.