3296W 10K 20K Ohms 0.5W Trimpot Precision Cermet Trimmer Potentiometer
Likaroloana
■ Sesepa sa cermet se nang le mahlakore a mangata.
■ Sebaka se seholo sa ho hanyetsa.
■ Ho nepahala ho hoholo, tokiso e tšepahalang ea holimo.
■ Boholo bo bonyenyane bakeng sa lits'ebetso tse nang le sebaka se fokolang.
■ Kaho e tšoarellang bakeng sa tšebeliso ea nako e telele.
■ Ho kenya habonolo ka sebaka se tloaelehileng sa phini.
■ Ditshebediso tse feto-fetohang tsa modumo, disebediswa le ditsamaiso tsa motlakase.
Tlhaloso
- Potentiometer ea 3296W Cermet Trimmer ke karolo e nepahetseng haholo e etselitsoeng lits'ebetso tsa indasteri tse hlokang liphetoho tse tšepahalang le tse nepahetseng. Potentiometer ena e thehiloeng ho multiturn, e thehiloeng ho cermet e koetsoe ho netefatsa ho tšoarella le ts'ebetso ea nako e telele. E fana ka mefuta e mengata ea ohmic ho tloha ho 10Ω ho isa ho 5MΩ ka mamello ea 10%, e leng se etsang hore e lokele litlhoko tse fapaneng tsa potoloho. E lekantsoe ho 0.5W ho 70°C, 3296W e fana ka bokhoni bo tsitsitseng ba ho sebetsana le matla.
- Potentiometer e na le leeto la motlakase la ho reteleha ha 25±2 le leeto lohle la mechini la ho reteleha ha 30±2, e leng se lumellang liphetoho tse hlophisitsoeng hantle. E sebetsa hantle ka har'a mocheso o pakeng tsa -55°C le +125°C, ka tekanyo ea mocheso ea ±100 ppm/°C, e netefatsang botsitso maemong a fapaneng a tikoloho. Boholo ba eona bo bonyenyane bo e etsa hore e be ntle bakeng sa lits'ebetso tse nang le sebaka se fokolang, ha kaho ea eona e tšoarellang e tiisa ts'ebeliso ea nako e telele.
- Ho kenya ho otlolohile ka lebaka la sebaka sa eona se tloaelehileng sa phini, 'me ho tenyetseha ha eona ho etsa hore e lokele lits'ebetso tse fapaneng, ho kenyeletsoa litsamaiso tsa molumo, lisebelisoa le litsamaiso tsa motlakase. Potentiometer ea 3296W Cermet Trimmer ke khetho e loketseng baenjiniere le baqapi ba batlang tharollo e tšepahalang, e nepahetseng le e bonolo ho e kenya bakeng sa litlhoko tsa bona tsa tokiso ea elektroniki.
Litlhaloso
| Litšobotsi tsa Motlakase | Mefuta e sa Resistance Range | 10Ω~5MΩ |
| Mamello ea Khanyetso | ± 10% | |
| Khanyetso ea Terminal | ≤±1% R kapa 3Ω | |
| Phapang ea Khanyetso ea ho Kopana (CRV) | ≤3%R kapa 3Ω | |
| Khanyetso ea ho kenya mocheso | 500 Vdc. R1≥1GΩ | |
| Mamella Motlakase | 101.3KPa, 500 Vac; 8.5KPa, 250 Vac | |
| Matla a Dielectric Boemo ba Leoatle | 500 Vac (1 Min.) | |
| Maeto a Atlehang | Liphetoho tse 25(±2) | |
| Litšobotsi tsa Tikoloho | Khanyetso ea Mocheso oa ho Weld | Ho kopanya maqhubu: Mocheso: 260ºC±5ºC, T: 3±1 Secs. Ho kopanya tšepe: Mocheso: 320ºC±5ºC, T: ≤2 Secs. |
| Matla a Lekantsoeng (max. a 300 volts) | 70ºC, 0.5W; 125ºC, 0W | |
| Boemo ba Thempereichara | -55°C ~ + 125°C | |
| Motsoako oa mocheso | ±250,±100 ppm/°C | |
| Phetoho ea mocheso | ΔR≤±2%R, Δ(Uab/Uac)≤±1% | |
| Ho thulana | 10-500Hz, 0.75mm, 6h ΔR≤±1%R, Δ(Uab/Uac)≤±2% | |
| Ho thothomela | 100G, ΔR≤±1%R, Δ(Uab/Uac)≤±2% | |
| Mamello ea Motlakase ho 70°C | Matla a Lekantsoeng a Lihora tse 1000 @ 70ºC; ΔR≤±3%R | |
| Bophelo ba ho Potoloha | Lipotoloho tse 200, ΔR≤±3%R | |
| Litšobotsi tsa 'Mele | Maeto a Mekaniki ka Kakaretso | Liphetoho tse 30±2 |
| Torque ea ho Qala | ≤25 mN.m | |
| Torque ea Clutch | ≤35 mN.m |
Tekanyo
Sephutheloana
Tlhaloso ea sephutheloana: Likotoana tse 50 / Tube, Likotoana tse 1K/2K/ 5K / CTN e Nyenyane, Likotoana tse 20K / CTN.
Likopo
• Lisebelisoa tsa elektroniki: E sebelisoa bakeng sa taolo ea molumo, tokiso ea keketseho, le taolo ea boemo ba lets'oao lisebelisoa tsa molumo, li-amplifier le li-mixer.
• Lisebelisoa: E sebedisetswa ho lekanya, ho lokisa kutlo, le ho lokisa disebediswa tsa ho lekanya, di-sensor le disebediswa tsa ho leka.
• Lisebelisoa tsa motlakase: E sebelisoa ho beha maemo a motlakase, ho lokisa meeli ea hona joale, le ho laola tlhahiso ea motlakase lipotolohong tsa tsamaiso ea motlakase le mehloling ea motlakase ea DC.
• Litaolo tsa indasteri: E sebedisetswa ho beha boleng ba ditshupiso, ho laola diphetoho tsa tshebetso, le ho laola mechini ditsamaisong tsa othomathiki tsa diindasteri.
• Lisebelisoa tsa elektroniki tsa bareki: E sebelisoa lisebelisoa tse kang lithelevishene, liea-le-moea le li-console tsa lipapali bakeng sa litlhophiso le litlhophiso tse laoloang ke basebelisi.
• Likoloi: E fumaneha lits'ebetsong tsa taolo ea likoloi bakeng sa ho fetola matla a mabone, lebelo la fene, le litsamaiso tse ling tsa elektroniki.
• Liroboto: E sebelisoa bakeng sa taolo ea boemo, tokiso ea kutlo, le taolo ea maikutlo lits'ebetsong tsa robotiki le lits'ebetsong tsa taolo ea motsamao.
Melemo
• Phepelo e tobileng fekthering, ha ho na bathusi ba mahareng.
• Lisetifikeiti tse tlatsitsoeng tse kang RoHS, REACH, jj le netefatso ea boleng bo holimo.
• Bokgoni bo lekaneng ba tlhahiso, nako e kgutshwane ya ho tlisa thepa.
• Sehlopha sa litsebi sa tšebeletso ea kamora thekiso.
• OEM le ODM lia fumaneha.